Reconstituted versus dry alfalfa hay in starter feed diets of Holstein dairy calves: Effects on feed intake,feeding and chewing behavior,feed preference,and health criteria

We investigated the effect of reconstitution of alfalfa hay on feeding and chewing behavior, sorting activity, and health status using 20 neonate Holstein male calves (3 d of age; 40.3 ± 1.30 kg of body weight) that were assigned randomly to 2 treatments, a starter feed containing either 10% dry (AH) or reconstituted alfalfa hay (RAH), each consisting of 10 calves. Alfalfa hay was reconstituted with water 24 h before feeding to achieve a theoretical dry mater (DM) content of 20%. Both starter diets had the same ingredients and nutrient compositions but differed in their DM content (90.9 vs. 66.6% DM for AH vs. RAH, respectively). Calves were weaned on d 50 and remained in the study until d 70. Reconstitution of alfalfa hay increased the percentage of particles retained on 8- and 1.18-mm sieves, but reduced feed materials retained on the bottom pan. Feeding RAH tended to increase meal frequency (preweaning) and increased meal duration (pre- and postweaning), and thereby increased time devoted to eating without affecting nutrient intake. Calves fed RAH tended to have lower eating rate during the pre- and postweaning periods. Tendencies to concurrent increase in rumination frequency and rumination duration in calves fed RAH increased time devoted to ruminating during the preweaning period; however, a tendency to longer rumination duration did not affect ruminating time during the postweaning period. Calves fed RAH spent less time resting and standing and more time drinking during the postweaning period. Non-nutritive oral behaviors were not affected by treatment during the pre- and postweaning period. Feeding RAH decreased sorting of particles retained on 8-mm sieve compared with AH; however, calves in both treatment groups sorted for particles retained on 8- and 1.18-mm sieves and against the feed materials retained on the bottom pan. Crude protein and neutral detergent fiber intakes of particles retained on the both 8- and 1.18-mm sieves increased in calves fed RAH versus AH, with no changes in intake of nutrients retained on the bottom pan. Calves fed AH were more susceptible to develop diarrhea (odds ratio = 2.02) and pneumonia (odds ratio = 4.74) and thereby had lower chances of being treated. We found no difference between treatment groups for frequency and medication days of diarrhea; however, calves fed RAH experienced fewer days with diarrhea. Furthermore, frequency and number of days with pneumonia and administration of medication were greater for calves fed AH compared with calves fed RAH. Blood concentrations of total protein and globulin tended to be higher in calves fed RAH compared with calves fed AH. Overall, feeding RAH increased time devoted to eating by increasing meal frequency and meal duration but did not affect feed intake due to lower eating rate. Calves in both treatment groups exhibited feed sorting at the extent to which they balanced intake of nutrients and met their nutritional needs. Calves, in general, were healthy, but it seems that feeding a diet containing reconstituted alfalfa hay has a potential health-promoting effect, possibly through reducing diet dustiness and improving immune status.     

Process design and techno‐economic analysis of ethyl levulinate production from carbon dioxide and 1,4‐butanediol as an alternative biofuel and fuel additive

Carbon dioxide capture, utilization, and storage (CCUS) is one of the promising negative emission technologies (NET). Within various CCUS routes available, CO₂ conversion into fuels is one of the attractive options. Currently, most of CO₂ conversion into fuels requires hydrogen, which is expensive and consume large energy to produce. Hence, a different route of producing fuel from CO₂ by utilizing 1,4‐butanediol as the raw material is proposed and evaluated in this study. This alternative route comprises production of levulinic acid from the reaction between CO₂ and 1,4‐butanediol and production of ethyl levulinate, an alternative biofuel and biofuel additive, via an esterification reaction of levulinic acid with ethanol. The process is designed and simulated according to the available data and evaluated in terms of its technical features. Because of the unavailability of reaction data for synthesis of levulinic acid from 1,4‐butanediol and CO₂, several assumptions were taken, which may implicate the accuracy of the studied design. This technical evaluation is followed by cost estimations and sensitivity analysis. Because of the free CO₂, the profitability of the plant depends strongly on the prices of the other chemicals and the price difference between 1,4‐butanediol (raw material) and ethyl levulinate (product). Monte Carlo simulation indicates that the proposed plant will always be profitable if the ethyl levulinate is slightly more expensive than the 1,4‐butanediol, highlighting that the process of producing ethyl levulinate from CO₂ is economically profitable. Future research should be directed towards a catalytic system that can effectively convert CO₂ into levulinic acid, by‐products produced from the two reaction steps, and reduce the excess ethanol used in the second reaction.     

A comprehensive review on bioinspired solar photovoltaic cells

Researchers have derived inspiration from the biophotosynthetic structures in nature and have started to synthesize the modified bioinspired solar cells copying the evolved organic and inorganic material properties. One of the highlighted examples of bioinspired photo voltaic (PV) cells is the astonishing achievement of an increase in the absorption of integrated sunlight waves in unpatterned solar cells simulated from the wings of the butterfly. Further, deployment possibilities of incorporating flexible cells on flat or curved surfaces for optimizing performance are also under progress. This article mainly discusses the recent concepts of bioinspired solar cells at the research and development level with the prospects and challenges that lie ahead in the upcoming field of photovoltaic renewable energy cell technology. Different potential materials found suitable for bioinspired solar cells construction are reviewed with their particular challenges.     

Integrated study of experiment and first‐principles computation for the characterization of a corium type ZrO8 complex in a Zr‐doped fluorite UO2

We, for the first time, observe ZrO₈ complex in Zr‐doped UO₂, which is a corium structure, using experimental characterization integrated with first‐principle computational validation. Atomic level structure of U_1?yZr_yO₂ pellets (y = 0.01, 0.03, 0.05, and 0.1) is identified using Raman spectroscopy measurement and X‐ray diffraction pattern analysis. The lattice constants shrink with increasing Zr doping levels, which consistently represents in the positive shift of T_2g Raman vibration peak around 445 cm^?1. More interestingly, conventionally unknown new Raman peak appears around 598 cm^?1, which has not been observed in neither a pure ZrO₂ nor UO₂ doped with tetravalent elements other than Zr. We unveil that the new peak originates from ZrO₈‐type complex formed on the fluorite UO₂. Our study provides precise understanding on the formation mechanisms and material properties of the corium in the hypervalent oxide.     

Surface‐modified carbon black derived from used car tires as alternative,reusable, and regenerable catalysts for H2 release studies from sodium borohydride methanolysis

Carbon black (CB) obtained from used car tire rubbers were treated with concentrated sulfuric and nitric acids. The oxidized CB (CB‐COO‐Na⁺) is subsequently modified with epichlorohydrin (ECH) and amines including polyethylene imine (PEI). These modified CBs such as CB‐PEI are used as metal‐free catalysts in methanolysis of sodium borohydride (NaBH₄) to produce hydrogen. The hydrogen generation rate (HGR) of 3089 ± 44.69 mL.min^‐1.g^‐1 is accomplished at room temperature with CB‐PEI‐hydrochloric acid (HCl) catalyst. The resulting activation energy of 34.7 kJ/mol for the temperature range of ?20°C to +30°C compares favorably to most of alternative catalysts reported in literature while reaction catalyzing capabilities of CB‐PEI‐HCl particles extend to the subzero temperature range (?20°C‐0°C). The reuse and regeneration studies conducted for the CB‐PEI‐HCl catalyst showed that these catalysts do provide complete conversion at every use up to five consecutive runs and retain 50 ± 2.5% of the original hydrogen generation rate at the fifth consecutive reuse. The CBs‐based catalysts are fully regenerated with HCl treatment.     

Striking Patterns: Contemporary Ikat Design and Its Future

This review presents the results of a conference on ikat textiles organized in the context of the exhibition Striking Patterns: Global Traces in Local Ikat Fashion at the Museum der Kulturen Basel, Switzerland (October 2016 to March 2017). Academics and professional experts, some of them working for NGOs, debated often neglected potentialities as well as the future of contemporary ikat design and other intricately patterned handwoven textiles: the significance of new patterns; intellectual property rights; and educational encouragement. The general focus lay on the controversially perceived innovation of textile patterns in Indonesia and Timor-Leste. We will here present the main arguments of the discussion and our own suggestions for further research.     

International Perspectives on Substantiating the Efficacy of Herbal Dietary Supplements and Herbal Medicines Through Evidence on Traditional Use

The efficacy of botanicals in medicines can be substantiated with evidence on traditional use, whereas in foodstuffs, this is often not possible. In Europe, for example, the evaluation and subsequent authorization of health claims on herbal dietary supplements (HDS) have been put on hold by the European Commission. This study aims to analyze the role of evidence on traditional use in international legal frameworks of foods and pharmaceuticals. Both legal sources as well as scientific studies offering insights into these regulatory frameworks were included into the analysis. The international approach toward evidence on traditional use for substantiating efficacy of botanicals varies highly. For herbal medicines, substantiating efficacy with evidence on traditional use is possible in all studied jurisdictions, except for Japan and the United States. HDS efficacy can only be substantiated with evidence on traditional use in India and New Zealand, although the enforcing authorities do not describe which data are required. Australia and Canada regulate botanicals in a separate “borderline” category from foods and pharmaceuticals. Both jurisdictions allow for substantiating efficacy with evidence on traditional use. This study's second objective was to assess the applicability of the international approaches in the European legal framework, in light of the ongoing political debate regarding the use of traditional evidence. Implementation of the analyzed international approaches would require major revisions of the current European legal framework. This review of international approaches might, however, aid in deciding upon future approaches for substantiating health claims with evidence on traditional use.     

Jute and hollow conjugated polyester composites for outdoor & indoor insulation applications

The research work aims at investigating the fitness of jute and hollow conjugated polyester (HCP) composites for indoor and outdoor applications. Limiting oxygen value index, natural weathering exposure was done on four optimized composite structures; i) sandwich structure composite (A); ii) blended non-woven structure composite (B); iii) multiple layers with 5% of low melt polyester added composite (C); (iv) multiple layers of non-woven stitched composite (D) were produced. Their tensile strength, strain at break, and Young’s modulus values were evaluated both before and after the coating of acrylic-based silicon emulsion (ASE). From the experimental results, it is suggested that sample A can be used for an interior trim, sample B can be a base material for interior designing, sample C can replace the usage of wood, plastics, metals, and alloys in hardware applicationsand sample D can be used in interiors as an insulation material in commercial buildings for the purpose of internal cooling or heating.